How to sharpen scissors with sandpaper?

Release Date:2023-08-01 10:21

Dull scissors can be frustrating to use, and they may not cut as cleanly and smoothly as they should. Instead of replacing your old scissors, you can give them a new lease of life by sharpening them with sandpaper. This cost-effective method is easy to do at home and requires minimal materials.

Step 1:Gather the Materials

To sharpen your scissors with sandpaper, you will need the following materials:

1. Coarse-grit sandpaper: Choose sandpaper with a coarse grit, preferably around 100 to 150, to effectively sharpen the blades.

2. Soft cloth: Use a soft cloth to wipe off any debris or residue from the scissors during the process.

Step 2:Prepare the Sandpaper

Cut a small piece of the coarse-grit sandpaper, approximately 4 to 6 inches long and 1 to 2 inches wide. Fold the sandpaper in half, with the abrasive side facing outward. Make sure the folded edge aligns well.

Step 3:Clean the Scissors

Before starting the sharpening process, it's essential to clean the scissors thoroughly. Use a soft cloth to wipe off any dust, debris, or grease from the blades. This step ensures that you get a smooth and effective sharpening result.

Step 4:Begin Sharpening

Hold the folded sandpaper with one hand, gripping the folded edge firmly between your thumb and fingers. With your other hand, open the scissors and insert one of the blades into the folded sandpaper, making sure the blade's cutting edge touches the abrasive surface.


Step 5:Sharpen with a Cutting Motion

Now, gently close the scissors while simultaneously cutting through the sandpaper. This cutting motion against the sandpaper will grind and sharpen the blade's edge, removing any dullness or nicks. Repeat this cutting motion several times on each blade to achieve the desired sharpness.

Step 6:Check the Sharpness

After several cutting motions, carefully inspect the blades cutting edges to assess their sharpness. If necessary, repeat the sharpening process until you achieve the desired sharpness and smooth cutting performance.

Step 7:Clean and Lubricate

Once you are satisfied with the sharpness, clean the scissors again to remove any sandpaper residue. You can use a soft cloth and a little rubbing alcohol to wipe the blades. After cleaning, apply a thin layer of sewing machine oil or any lubricant along the blades to maintain their sharpness and prevent corrosion.

Sharpening scissors with sandpaper is a simple and effective DIY method to restore the cutting edge of dull scissors. By following the step-by-step guide outlined in this article, you can give your old scissors a new life and ensure smooth and precise cutting performance. Regularly sharpening your scissors with sandpaper will extend their lifespan and save you from having to invest in new ones. Remember to handle the scissors and sandpaper with care during the process, and always check the sharpness after each sharpening to achieve the best results.

Share to: